truck norris cam
Truck Norris Cam

#1 Supercharge Your Ride: The Ultimate Guide to Truck Norris Cam

Spread the love

Unleash the power within your LS engine with Truck Norris Cam! Learn how this performance camshaft boosts horsepower, torque, and overall performance. Discover compatibility, installation, tuning tips, and more!

Introduction: Unleashing Power with the Truck Norris Cam

Ever feel like your LS engine isn’t living up to its full potential? Craving more power and responsiveness on the road? Look no further than the Truck Norris Cam, a performance upgrade that injects a serious dose of muscle into your ride.

Inspired by the legendary Chuck Norris and his unwavering toughness, the Truck Norris Cam isn’t just a catchy name. It’s a meticulously designed camshaft built to unleash the hidden power within your LS engine.

This blog post will delve deep into the world of Truck Norris Cams, exploring their benefits, applications, and how they can transform your truck’s performance. By the end, you’ll have a clear understanding of whether this upgrade is the right choice to take your LS engine to the next level.

Brian Tooley BTR Truck Norris NSR Camshaft No Springs Required for Gen 3/4 LS 4.8 5.3 5.7 6.0 6.2 LS1 1999-2013 Vortec (Cam Only)

TRUCK NORRIS NSR Camshaft – No Springs Required For 1999-2013 GM Gen3/4 LS Truck Engines 4.8, 5.3, 6.0, 6.2.

Specs: 212/22X .498″/.498″ 107 LSA 3 Bolt Pattern

Benefits of Upgrading to a Truck Norris Cam

Stock LS engines are known for their reliability and decent power, but for true performance enthusiasts, there’s always room for more. Upgrading to a Truck Norris Cam offers a range of significant benefits that can take your truck’s driving experience to a whole new level. Here’s what you can expect:

  • Horsepower and Torque Gains: The most noticeable benefit is the increase in horsepower and torque. Truck Norris Cams are designed to optimize valve timing, allowing for more efficient air intake and exhaust flow. This translates to a significant boost in power, especially compared to a stock camshaft.
  • Enhanced Performance Across the RPM Range: Many performance camshafts sacrifice low-end torque for high-end horsepower. Truck Norris Cams aim to strike a balance, delivering improvements throughout the entire RPM range. You’ll experience better acceleration from a stop and increased pulling power while towing or hauling heavy loads.
  • Improved Fuel Economy (Potential): In some cases, a Truck Norris Cam can lead to slightly better fuel economy. This is because a more efficient engine with increased power can potentially require less effort to maintain cruising speed. However, driving habits and overall vehicle setup can also play a role in fuel efficiency.

It’s important to remember that Truck Norris Cams are designed for performance and may not be the best choice for everyone. They might require additional modifications and may not be suitable for daily commuters who prioritize fuel efficiency above all else.

Applications: Does Your LS Engine Qualify for a Truck Norris Cam?

The good news is that Truck Norris Cams boast a wide range of compatibility within the LS engine family. However, it’s crucial to ensure your specific engine is a perfect match for this performance upgrade. Here’s what you need to know:

  • Compatibility Focus: Truck Norris Cams are specifically designed for Gen 3 and Gen 4 LS engines. These engines were commonly found in Chevrolet and GMC trucks and SUVs from 1999 to 2013.
  • Identifying Your Engine: Unsure what generation LS engine your truck possesses? Look for the Engine Code on your vehicle identification sticker (VIN sticker) typically located on the driver’s side door jamb. A quick web search with your engine code should reveal its generation.

Here are some specific examples of Chevrolet and GMC vehicles that typically house Gen 3 or Gen 4 LS engines compatible with Truck Norris Cams:

  • Chevrolet Silverado/Sierra (1999-2013)
  • Chevrolet Tahoe/Suburban (1999-2013)
  • GMC Canyon/Colorado (2004-2012)
  • GMC Yukon/Yukon XL (1999-2013)

Brian Tooley Racing BTR Truck Norris Camshaft

BTR GEN 3 & 4 LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 Engines Specs: 212/22X .552″/.552″ 107 LSA 3 Bolt Pattern

Important Note: This list is not exhaustive. It’s always best to double-check your engine code or consult with a performance shop to confirm compatibility before purchasing a Truck Norris Cam for your specific vehicle.

Installation Considerations: Essential Information Before You Begin

While the idea of unleashing hidden power within your LS engine might be thrilling, installing a Truck Norris Cam isn’t a simple bolt-on upgrade. Here are some crucial factors to consider before you begin:

  • Aftermarket Performance Part: Truck Norris Cams are classified as aftermarket performance parts. This means they are designed to optimize power beyond the stock capabilities of your engine.
  • Potential for Additional Modifications: Installing a Truck Norris Cam might necessitate additional modifications to ensure optimal performance and engine safety. These could include upgraded valve springs, pushrods, and possibly a performance valve train.
  • Professional Installation Recommended: Due to the potential for additional modifications and the technical nature of camshaft installation, it’s highly recommended to seek assistance from a qualified performance shop. Mechanics with experience in LS engine modifications can ensure proper installation and avoid any potential complications.

Remember: While some enthusiasts might attempt a Truck Norris Cam installation themselves, consulting a professional is the safest and most reliable route to maximizing the benefits of this upgrade. They can assess your specific engine setup, recommend necessary modifications, and perform the installation with expertise.

Performance Tuning and Dyno Results

Unleashing the full potential of your Truck Norris Cam requires proper tuning of your engine computer (ECU). The stock ECU settings might not be optimized for the altered airflow characteristics of the new camshaft.

  • ECU Tuning: Performance shops typically offer ECU tuning services specifically tailored to your Truck Norris Cam upgrade. This tuning adjusts parameters like fuel injection and ignition timing to maximize power delivery and ensure smooth engine operation.
  • Dyno Results: Dyno testing is a valuable tool for measuring the horsepower and torque gains achieved after installing a Truck Norris Cam and performing ECU tuning. While dyno results can vary depending on specific engine setups and tuning practices, many online resources showcase dyno tests with Truck Norris Cams. These tests often demonstrate significant horsepower and torque increases compared to stock camshafts.

It’s important to note: Including this section is optional. While dyno results can be interesting, the decision to include them depends on your target audience. If you’re targeting enthusiasts who crave performance data, including dyno results can be a valuable addition. However, if you’re focusing on a broader audience who might be new to performance upgrades, focusing on the core benefits and considerations might be more suitable.

Cost and Availability: Where to Find Your Truck Norris Cam

Truck Norris Cams offer a performance boost at a price point that caters to many LS enthusiasts. Here’s a breakdown of what to expect:

  • Cost: The cost of a Truck Norris Cam itself typically falls within the range of $389 to $465 USD (depending on the retailer and specific kit options).
  • Additional Parts: Remember, installing a Truck Norris Cam might require additional parts like valve springs, pushrods, and potentially a performance valve train. These additional parts can add to the overall cost of the upgrade.
  • Availability: Truck Norris Cams are readily available from various performance parts retailers online. Brian Tooley Racing, the manufacturer, also offers them directly on their website.

Pro Tip: It’s wise to shop around and compare prices from different retailers before making a purchase. Some retailers might offer package deals that bundle the camshaft with commonly required accompanying parts at a discounted price.

Conclusion: Rev Up Your Ride with the Truck Norris Cam

If you crave more power and a thrilling driving experience from your LS-powered truck or SUV, the Truck Norris Cam might be the perfect performance upgrade. This meticulously designed camshaft injects a serious dose of muscle, unlocking hidden potential within your engine.

By boosting horsepower, torque, and overall performance across the RPM range, the Truck Norris Cam can transform your truck into a true powerhouse. Remember, these are aftermarket performance parts, and installation might require additional modifications and professional expertise.

Ready to unleash the beast? Carefully consider the information presented here, and consult with a performance shop to determine if a Truck Norris Cam is the right fit for your specific vehicle and driving goals. With proper planning and execution, you can experience the exhilarating power and performance gains that the Truck Norris Cam has to offer.

Frequently Asked Questions: Truck Norris Cams Demystified

Here are some of the most common questions regarding Truck Norris Cams:

Q: Will a Truck Norris Cam fit my LS engine?

A: Truck Norris Cams are designed for Gen 3 and Gen 4 LS engines typically found in Chevrolet and GMC trucks and SUVs from 1999 to 2013. Double-check your engine code or consult a performance shop for confirmation.

Q: How much horsepower does a Truck Norris Cam add?

A: Specific gains can vary, but Truck Norris Cams typically offer significant horsepower and torque increases compared to stock camshafts. Dyno results showcasing these gains are often available online.

Q: Do I need additional parts to install a Truck Norris Cam?

A: Yes, installing a Truck Norris Cam might require additional parts like upgraded valve springs, pushrods, and potentially a performance valve train.

Q: Can I install a Truck Norris Cam myself?

A: While some may attempt it, professional installation by a qualified performance shop is highly recommended due to the potential for additional modifications and the technical nature of the job.

Q: How much does a Truck Norris Cam cost?

A: The camshaft itself typically costs between $389 and $465 USD, depending on the retailer and options. Remember, additional parts might be needed, adding to the overall cost.

Q: Where can I buy a Truck Norris Cam?

A: Truck Norris Cams are readily available online from various performance parts retailers and directly from the manufacturer, Brian Tooley Racing.

Q: Will a Truck Norris Cam improve my gas mileage?

A: In some cases, a Truck Norris Cam might lead to slightly better fuel economy due to a more efficient engine. However, driving habits and overall vehicle setup play a bigger role.

Q: Are Truck Norris Cams street legal?

A: As long as the camshaft meets emissions regulations for your vehicle, it should be street legal. However, local regulations might vary, so it’s always best to check with local authorities.